2025.3.4
首页 ▸ Integrations ▸

WeatherFlow

The WeatherFlow integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] is a local-only integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] that reads weather data from all WeatherFlow Tempest compatible weather station on the local network.

Note

You may see slight deviations between the values reported in Home Assistant and the values in the WeatherFlow App. This is because the WeatherFlow app considers both forecasts and neighboring weather stations in addition to the local data used in this integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more].

Which integration(s) should I use

There are two integrations for WeatherFlow devices, and you are not limited to selecting just one.

  • WeatherFlow is a local only UDP-based integration that will read data directly from the device. This integration does require the Home Assistant server and the WeatherFlow device to be on the same subnet.

  • WeatherFlow Cloud is a cloud-based integration that closely mirrors the data available via the Weatherflow Tempest mobile applications and is likely a good starting place for most users as it provides both Forecast and Sensor data.

配置

要将 WeatherFlow hub 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

手动配置步骤

如果上述 My 按钮不起作用，您也可以手动执行以下步骤：

Sensors

This integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] will expose the following sensors:

  • Air density
  • Air pressure
  • Dew point
  • Feels like
  • Humidity
  • Illuminance
  • Irradiance
  • Lightning average distance
  • Lightning count
  • Precipitation (accumulated over the previous minute)
  • Precipitation intensity (extrapolated from the accumulation over the previous minute)
  • Precipitation type
  • Temperature
  • UV index
  • Vapor pressure
  • Wet bulb temperature
  • Wind direction
  • Wind direction average
  • Wind gust
  • Wind lull
  • Wind speed

Diagnostic sensors

Additionally the following diagnostic sensors are available:

  • Battery voltage
  • Signal strength
  • Uptime

Networking notes

This integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] relies on the ability of Home Assistant to receive UDP traffic on port 50222. You may run into trouble if you have a more complex network setup utilizing either VLANs or multiple subnets.