Tesla Wall Connector
The Tesla Wall Connector integration allows you to integrate your Gen 3 Tesla Wall Connector
配置
要将 Tesla Wall Connector integration 添加到您的 Home Assistant 实例中，请使用此 My 按钮：
Tesla Wall Connector 可以被 Home Assistant 自动发现。如果发现了实例， 它将显示为 已发现。您可以立即进行设置。
如果没有自动发现，请不要担心！您可以设置一个 手动集成条目：
-
浏览到您的 Home Assistant 实例。
-
转到
设置 > 设备与服务。 -
在右下角，选择
Add Integration 按钮。 -
从列表中选择 Tesla Wall Connector。
-
按照屏幕上的说明完成设置。
Supported functionality
Entities
The Tesla Wall Connector integration provides the following entities.
Sensors
- Energy - Running total of energy used by the Wall Connector.
- Session energy - Energy used during the current charging session.
-
Status - Present status of the Wall Connector.
- Possible states - booting, not_connected, connected, ready, negotiating, error, charging_finished, waiting_car, charging_reduced, charging
- Contactor closed - Binary sensor indicating if the Wall Connector is currently charging.
- Grid frequency - Sensor for grid frequency of the incoming AC power.
- Grid voltage - Sensor for grid voltage of the incoming AC power.
- Handle temperature - Sensor for temperature of the Wall Connector handle.
- MCU temperature - Sensor for temperature of the Wall Connector Main Computing Unit (MCU).
- PCB temperature - Sensor for temperature of the Wall Connector Power Control Board (PCB).
- Phase current - Sensor for the power current of each incoming AC electricity phase.
- Phase voltage - Sensor for the voltage of each incoming AC electricity phase.
- Vehicle connected - Binary sensor indicating if a vehicle is connected.
- Status code - Sensor for error codes generated by the Wall Connector.
Energy dashboard
Energy usage can be easily added to the built-in Energy dashboard using the energy sensor.
To add the Tesla Wall Connector to your Energy dashboard:
- Navigate to Settings > Dashboards > Energy.
- In the Electricity grid section, select Add consumption.
- Select the Tesla Wall Connector’s “Energy” sensor.
- Select Save.