2025.3.4
首页 ▸ Integrations ▸

TechnoVE

The TechnoVE integration provides connectivity with TechnoVE Smart Charging Station through the station local API.

配置

要将 TechnoVE device 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

TechnoVE 可以被 Home Assistant 自动发现。如果发现了实例， 它将显示为 已发现。您可以立即进行设置。

手动配置步骤

如果没有自动发现，请不要担心！您可以设置一个 手动集成条目：

Binary sensors

The integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] adds the following binary sensors:

  • Battery protected - On / Off
  • Charging - Charging / Not charging
  • Conflict with power sharing mode - On / Off
  • Power sharing mode - On / Off
  • Static IP - Connected / Not Connected
  • Update - Up-to-date / Update available

Number

The integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] adds the following number entity:

Name Description
max current Determines the maximum current limit that the charging station can provide to the vehicle. Note: this value can only be set when the power-sharing mode is not enabled.

Sensors

The integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] adds the following sensors:

  • Input voltage
  • Output voltage
  • Max station current
  • Current
  • Total energy usage
  • Last session energy usage
  • Wi-Fi signal strength
  • Wi-Fi network name
  • Status, one of the following values:
    • Unplugged
    • Plugged, waiting
    • Plugged, charging
    • Out of activation period
    • High tariff period

Switch

The integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] adds the following switch:

Name Description
Auto-charge mode When enabled, vehicles will start charging automatically when plugged in. When turned off, charging will need to be manually started each time a vehicle is plugged in. Note: Disabling auto-charge mode does not interrupt an ongoing charging session.
Charging enabled When enabled, vehicles will be able to charge. Disable it to stop a vehicle from charging. Note: This switch can only be used when auto-charge mode is disabled.