2025.3.4
首页 ▸ Integrations ▸

StarLine

The starline integration lets you retrieve data of your StarLine security system from the StarLine portal. You will need a working StarLine account.

This integration provides the following platforms:

  • Binary sensors: Hand brake, hood, trunk, alarm status, doors lock state, handsfree, neutral, moving ban status, ignition state, and autostart state.
  • Device tracker: The location of your car.
  • Lock: Control the lock of your car.
  • Sensors: Battery level, SIM card balance, GSM signal level, GPS satellites count, fuel volume, mileage, OBD errors, interior temperature and engine temperature.
  • Switches: Start/stop engine, heater (webasto), additional channel, and service mode.
  • Buttons: Sound the horn, flex logic, and panic mode.
  • Actions: Update the state, set update frequency. More details can be found here.

Prerequisites

Create a new application in the StarLine developer profile.

Note

The integration makes API calls to StarLine servers to retrieve data. It gets only the latest set of values that are valid for the moment of the API call. This means that the integration does not retrieve or store values, StarLine events, or parameters between the API calls. You can make up to 1000 API calls per day, which means you could make one approximately every 86 seconds. By default, the state of integration will be updated every 3 minutes and OBD information will be updated every 3 hours, making 488 calls per day. It is not recommended to set an update interval of less than 90 seconds.

配置

要将 StarLine integration 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

手动配置步骤

如果上述 My 按钮不起作用，您也可以手动执行以下步骤：

Actions

Update the state

The starline.update_state action fetches the last state of the device from the StarLine server.

This action does not require any attributes.

Set scan interval

The starline.set_scan_interval action sets update frequency for entities.

Data attribute Optional Description
scan_interval no Update frequency in seconds.

Set scan OBD interval

The starline.set_scan_obd_interval action sets update frequency for OBD information.

Data attribute Optional Description
scan_interval no Update frequency in seconds.

Disclaimer

This software is not affiliated with or endorsed by ScPA StarLine Ltd.