2025.3.4
首页 ▸ Integrations ▸

Slide Local

The Slide Local integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] allows you to integrate your Slide devices in Home Assistant using the local API.

Supported devices

The integration should work with all Slide covers (API version 1 and 2).

Prerequisites

Before you can use the integration, you have to make sure the slide is configured for the local API. By default, the Slide connects to the cloud API, but it is possible to use the local API, too (only one of them can be active). To switch between the cloud and local API, do the following:

Press the reset button 2x

LED flashes 5x fast: cloud API disabled, local API enabled LED flashes 2x slow: local API disabled, cloud API enabled

screenshot slide bottom

配置

要将 Slide Local device 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

Slide Local 可以被 Home Assistant 自动发现。如果发现了实例， 它将显示为 已发现。您可以立即进行设置。

手动配置步骤

如果没有自动发现，请不要担心！您可以设置一个 手动集成条目：

To setup the integration you need the following information:

hostname

Hostname or IP of the slide device.

password

The device code of your Slide (inside of your Slide or in the box, 8 characters). Only required for API 1, with API 2 you can fill in anything here.

选项

Slide Local 的选项可以通过用户界面设置，具体步骤如下：

  • 浏览到您的 Home Assistant 实例。
  • 转到 设置 > 设备与服务。
  • 如果配置了多个 Slide Local 实例，请选择您想配置的实例。
  • 选择集成，然后选择 配置。
Invert position

Check the box, if your cover uses inverted positions for open and closed.

Supported functionality

Cover

Your slide device will appear as cover.

Button

You can start the calibration sequence for your slide by pushing on the Calibration button.

Switch

You can enable/disable the Touch&Go functionality (open/close cover by a short pull on the cover) by using the TouchGo switch.

Data updates

The integration fetches data from the device every 15 seconds.

Known limitations

The integration only provides connection with Slide devices via the local API. The cloud API is no longer available.

Remove integration

This integration can be removed by following these steps:

从Home Assistant中移除集成实例

  1. 前往 设置 > 设备与服务 并选择集成卡片。
  2. 从设备列表中，选择要删除的集成实例。
  3. 在条目旁边，选择三个点 菜单。然后，选择 删除。