2025.3.4
首页 ▸ Integrations ▸

SensorPush Cloud

Integrates SensorPush Cloud devices into Home Assistant.

Prerequisites

A G1 WiFi Gateway is required to make use of the Cloud API. To activate API access, log in to the Gateway Cloud Dashboard and agree to the terms of service.

Sensor entities (temperature, humidity, barometric pressure) will not be available to Home Assistant until you have activated the device with the SensorPush app on iOS or Android.

Supported devices

配置

要将 SensorPush Cloud integration 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

手动配置步骤

如果上述 My 按钮不起作用，您也可以手动执行以下步骤：

Sensors

For each device, the following sensors are created:

Sensor Description
altitude Measures the altitude. (disabled by default)
atmospheric_pressure Measures the barometric pressure. (disabled by default)
battery_voltage Measures the battery voltage. (disabled by default)
dewpoint Measures the dew point. (disabled by default)
humidity Measures the relative humidity.
signal_strength Measures the Bluetooth signal strength. (disabled by default)
temperature Measures the temperature.
vapor_pressure Measures the vapor-pressure deficit. (disabled by default)

Known limitations

  • atmospheric_pressure is not available on HT1 and HT.w series devices.

Removing the integration

This integration follows standard integration removal. No extra steps are required.

从Home Assistant中移除集成实例

  1. 前往 设置 > 设备与服务 并选择集成卡片。
  2. 从设备列表中，选择要删除的集成实例。
  3. 在条目旁边，选择三个点 菜单。然后，选择 删除。