Schlage

The Schlage integration provides connectivity with Schlage WiFi smart locks through Schlage’s cloud API.

Known working devices

• Schlage Encode Smart WiFi Deadbolt
• Schlage Encode Smart WiFi Lever
• Schlage Encode Plus Smart WiFi Deadbolt

Other devices not listed above have not been tested and may not function as expected.

There is currently support for the following device types within Home Assistant:

• Binary sensor
• Lock
• Sensor
• Switch

配置

要将 Schlage integration 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

Data updates

The Schlage integration fetches updated lock state data every 30 seconds.

Binary sensor

Once you have enabled the Schlage integration, you should see the following binary sensor:

• Keypad disabled - Indicates that the keypad has been disabled, typically due to too many incorrect lock codes being attempted.

Select

Once you have enabled the Schlage integration, you should see the following selects:

• Auto Lock Time - Configure the time until the deadbolt automatically locks, or disable the auto-lock feature entirely. For example, 0: auto-lock is disabled, 15: auto-lock after 15 seconds, 300: auto-lock after 5 minutes.

Sensor

Once you have enabled the Schlage integration, you should see the following sensors:

• Lock Battery

Switch

Once you have enabled the Schlage integration, you should see the following switches:

• 1-Touch Locking - When enabled, locks the lock with a press of the Schlage button.
• Keypress Beep - Controls whether the lock will emit beeping tones on use.

Removing the integration

This integration follows standard integration removal. No extra steps are required.

从Home Assistant中移除集成实例

1. 前往 设置 > 设备与服务 并选择集成卡片。
2. 从设备列表中，选择要删除的集成实例。
3. 在条目旁边，选择三个点 菜单。然后，选择 删除。