2025.3.4
首页 ▸ Integrations ▸

Raspberry Pi Camera

The rpi_camera integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] allows you to integrate the Raspberry Pi camera into Home Assistant. This integration uses the application raspistill to store the image from camera.

Important

This integration is only available on Home Assistant Core installation types. Unfortunately, it cannot be used with Home Assistant OS, Supervised or Container.

Configuration

To enable this camera in your installation, add the following to your configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] file. 在更改了configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] 文件后，重启 Home Assistant 以应用更改。 该集成现在显示在集成页面的 设置 > 设备与服务 下。其实体在集成卡片上以及实体标签上列出。

# Example configuration.yaml entry
rpi_camera:

The whole set of configuration variables is documented here Raspberry Pi Camera Module - Raspberry Pi Documentation. They are not all wrapped by this rpi_camera platform.

Configuration Variables

Looking for your configuration file?
image_width integer (Optional, default: 640)

Set the image width.

name string (Optional, default: Raspberry Pi Camera)

Name of the camera.

image_height integer (Optional, default: 480)

Set the image height.

image_quality integer (Optional, default: 7)

Set the image quality (from 0 to 100).

image_rotation integer (Optional, default: 0)

Set image rotation (0-359).

horizontal_flip integer (Optional, default: 0)

Set horizontal flip (0 to disable, 1 to enable).

vertical_flip integer (Optional, default: 0)

Set vertical flip (0 to disable, 1 to enable).

timelapse integer (Optional, default: 1000)

Takes a picture every this many milliseconds (thousands of a second) - the default means one picture a second.

overlay_metadata integer (Optional, default: none)

Adds some text and/or metadata onto the picture. Check the --annotate section.

overlay_timestamp string (Optional, default: none)

Helper to add date/time onto the picture. Format as used by strftime.

file_path string (Optional)

Save the picture in a custom file path.

Default:

A temporary file is used.

The given file_path must be an existing file because the camera platform setup performs a writeable check on it. Also, keep in mind that the path should be whitelisted.

相关主题