2025.3.4
首页 ▸ Integrations ▸

P1 Monitor

The P1 Monitor integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] allows you to gather data from your P1 Monitor device and use it in Home Assistant.

P1 Monitor is a piece of software that can be installed on a Raspberry Pi or other Linux-based system. It reads the data from your smart meter via the serial port (P1), such as your energy consumption, but also that of gas or a water meter.

Note

If you’re not using P1 Monitor software, you’re likely looking for the DSMR Smart Meter integration, which connects directly to DSMR-compatible smart meters.

配置

要将 P1 Monitor integration 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

手动配置步骤

如果上述 My 按钮不起作用，您也可以手动执行以下步骤：

Host

The IP address or hostname of your P1 Monitor instance.

Port

The port number of your P1 Monitor instance. The default port is 80.

Data updates

The integration will poll your P1 Monitor instance every 5 seconds to update the data in Home Assistant.

Sensors

The P1 Monitor platform mainly provides sensors that you can use in your energy dashboard.

SmartMeter

Read out what your meter readings are for energy consumption/yield, see what your current power consumption is and in which tariff period you are currently.

  • Gas Consumption (m3)
  • Power Consumption / Production (W)
  • Energy Consumption Low/High (kWh)
  • Energy Production Low/High (kWh)
  • Energy Tariff Period (low / high)

Note

By default, the gas consumption entity is disabled. To use it, you need to enable it.

Phases

See per phase what your voltage, current and power consumption/production is.

  • Voltage phases L1/2/3 (V)
  • Current Phases L1/2/3 (A)
  • Power consumed phases L1/2/3 (W)
  • Power Produced phases L1/2/3 (W)

WaterMeter

Important

You need to run at least version 1.1.0 of P1 Monitor, to use a water meter.

See how much water you consume per day, in total and the number of counted pulses.

  • Water Consumption - day (liters)
  • Water Consumption - total (m3)
  • Pulse Count

Settings

You can use the rates set in P1 Monitor for your calculations in Home Assistant.

  • Gas Consumption Price
  • Energy Consumption Price Low/High
  • Energy Production Price Low/High

Removing the integration

This integration follows standard integration removal. No extra steps are required.

从Home Assistant中移除集成实例

  1. 前往 设置 > 设备与服务 并选择集成卡片。
  2. 从设备列表中，选择要删除的集成实例。
  3. 在条目旁边，选择三个点 菜单。然后，选择 删除。