Open Hardware Monitor

The openhardwaremonitor integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] uses your Open Hardware Monitor installation as a source for sensors that will display system information.

Setup

OpenHardwareMonitor must be running on the host, with “Remote web server” active. You also need to open inbound port (TCP 8085) on the host..

To open port (on Windows):

1. Navigate to Control Panel, System and Security and Windows Firewall.
2. Select Advanced settings and highlight Inbound Rules in the left pane.
3. Right click Inbound Rules and select New Rule.
4. Add the port you need to open and click Next.
5. Add the protocol (TCP) and the port number (8085) into the next window and click Next.
6. Select Allow the connection in the next window and hit Next.
7. Select the network type as you see fit and click Next.
8. Name the rule and click Finish.

To open port with firewalld (Linux):

sudo firewall-cmd --permanent --add-port=8085/tcp
sudo firewall-cmd --reload

Configuration

To add Open Hardware Monitor to your installation, add the following to your configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] file. 在更改了configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] 文件后，重启 Home Assistant 以应用更改。 该集成现在显示在集成页面的 设置 > 设备与服务 下。其实体在集成卡片上以及实体标签上列出。

# Example configuration.yaml entry
sensor:
  - platform: openhardwaremonitor
    host: IP_ADDRESS