1-Wire

The Onewire integration supports sensors that use the 1-wire bus for communication.

Every 1-wire device has a (globally) unique ID that identifies the device on the bus. The first two digits identify a device family and the last 14 digits are a globally unique number given to it during manufacturing.

Different families have different functionality and can measure different quantities.

Each 1-wire component data sheet describes the different properties the component provides. The owfs software adds some extra tools to make it easier for DIY implementers to use the component.

Supported devices:

Binary sensors:

Select:

Sensors:

Switches:

Bridges:

Notes:

• The TAI-8570 Pressure Sensor is based on a 1-wire composite device by AAG Electronica. It contains, above 1-wire components, also a barometer, hygrometer and illuminance sensors. This onewire platform can read and present values from that device, but the sensors will default to disabled ⁴.

• For hobbyists, it is quite common to use DS2438 or DS2760 families of Smart Battery Monitor as a multipurpose measurement node that can place temperature, humidity, current, thermocouple temperature, and luminosity on the 1-wire bus by just adding some standard components to the DS2438 or DS2760. For different component types, there are ready-made algorithms implemented in owfs. Those are exposed by the owfs software and can be read by this platform. The B1-R1-A/pressure is exposed as a barometric pressure sensor. S2-R1-A/illuminance is presented as an illuminance sensor. For a more detailed description of these properties, refer to the owfs documentation DS2438, DS2760. For these components, the more basic quantities (temperature, VAD, VDD and IAD) are exported as separate sensors. Please note that some of the sensors will default to disabled ⁴.

• Hobbyboards is a company that has been selling DIY boards of different kinds. The company has been away from the market for some time, so no reference to the boards can be made. This platform has an implementation for some of those.

• Some sensors are disabled by default to avoid overloading the bus. These can be activated by opening the integrations page in your configuration, listing your 1-Wire integration devices and updating the entity.

• Bridge devices have no sensors. The aux and main branches are searched for additional 1-wire devices during discovery.

• Multisensors manufactured by Embedded Data Systems. Currently only EDS0066 (temperature/barometric pressure) and EDS0068 (temperature/humidity/barometric pressure/light) are supported.

Interfacing with the 1-wire bus

The 1-Wire bus can be connected with a remote 1-wire host over a network connection using owfs and owserver.

Interface adapter setup

owserver on Linux hosts is part of the owfs 1-Wire file system. When a 1-wire interface adapter is used, you can access sensors on a remote or local Linux host that is running owserver. owserver by default runs on port 4304. Use the host option to specify the host or IP of the remote server, and the optional port option to change the port from the default.

配置

要将 1-Wire hub 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

1-Wire 可以被 Home Assistant 自动发现。如果发现了实例， 它将显示为 已发现。您可以立即进行设置。

Entities and attributes

Upon startup of the platform, the 1-wire bus is searched for available 1-wire devices. On Bridge devices, the aux and main branches are recursively searched. For each device that this platform handles (see list of supported devices above), the platform adds one sensor for each physical quantity it measures. The name of the sensor is the device ID with the physical quantity it measures appended. Unsupported sensors are noted with a warning message in the log.

sensor.28.FF5C68521604_temperature

Each sensor will present its value in the state variable and for presentation purposes, rounded to one decimal for analog values and as integers for counts.

Each sensor also exposes some additional attributes.

device_file: /28.FF5C68521604/temperature              << Device path in owfs file system (or on Rpi system directory)
raw_value: 31.9375                                     << The raw measurement numbers as red from device. Not rounded.
unit_of_measurement: °C                              
friendly_name: 28.FF5C68521604 Temperature

Units with multiple sensors

This platform works with devices with multiple sensors, which will cause a discontinuity in recorded values. Existing devices will receive a new ID and therefore show up as new devices. If you wish to maintain continuity, it can be resolved in the database by renaming the old devices to the new names.

Connect to your database using the instructions from Database section. Check the names of sensors:

SELECT entity_id, COUNT(*) as count FROM states GROUP BY entity_id ORDER BY count DESC LIMIT 10;

Alter the names of sensors using the following examples:

UPDATE states SET entity_id='sensor.<sensor_name>_temperature' WHERE entity_id LIKE 'sensor.<sensor_name>%' AND attributes LIKE '%\u00b0C%';
UPDATE states SET entity_id='sensor.<sensor_name>_pressure' WHERE entity_id LIKE 'sensor.<sensor_name>%' AND attributes LIKE '%mb%';
UPDATE states SET entity_id='sensor.<sensor_name>_humidity' WHERE entity_id LIKE 'sensor.<sensor_name>%' AND attributes LIKE '%%%' ESCAPE '';

Remember to replace <sensor_name> with the actual name of the sensor, as seen in the SELECT query.

Removing the integration

This integration follows standard integration removal. No extra steps are required.

从Home Assistant中移除集成实例

1. 前往 设置 > 设备与服务 并选择集成卡片。
2. 从设备列表中，选择要删除的集成实例。
3. 在条目旁边，选择三个点 菜单。然后，选择 删除。