myUplink

The myUplink integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] lets you get information about and control heat-pump devices supporting myUplink using the official cloud API.

The integration will connect to your account and download all available data from the API. The downloaded information will be used to create devices and entities in Home Assistant. There can be from a few entities up to many hundreds depending on the type of equipment. The integration will make the best effort to map the data-points in the API to sensors, switches, number, and select entities.

Prerequisites

1. Visit https://myuplink.com/register and sign up for a user account.
2. Go to Applications, and register a new App:

• Application Name: Home Assistant (or whatever name makes sense to you)
• Description: A brief description of how you’ll use this application (e.g., “Home Assistant integration for controlling my heat pump”)
• Callback URL: https://my.home-assistant.io/redirect/oauth

配置

要将 myUplink integration 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

The integration configuration will require the Client ID and Client Secret created above. See Application Credentials for more details.

Supported heat-pump systems

The integration supports all heat-pump devices that can be connected to the myUplink cloud service. See Works with myUplink. However, the representation in Home Assistant depends on how and to what extent the manufacturer has implemented the service.

Use cases

Common use cases include:

• System Monitoring: Display the current operation state of the pump (heating house, pool, or hot water)
• Smart Notifications: Get alerts when the water temperature is low in the heater tank
• Automation: Adjust the temperature curve offset during holiday mode
• Analytics: View long-term statistics and graphs for the relevant sensors

Example

Automation that will send a notification to a smartphone when the hot water reserve is getting low. In this example a temperature below 42°C in the middle of the water tank will trigger the notification. Note that actual entity name varies between models of heat pumps. You will have to adapt the yaml code to your own installation.

automation:
  - alias: "Notify on low hot water reserve"
    triggers:
      - trigger: numeric_state
        entity_id:
          - sensor.your_pump_hot_water_charging_bt6
        below: 42
    actions:
      - action: notify.mobile_app_your_device
        data:
          message: "Hot water reserve is getting low."
          title: "Water heater"

Data updates

The integration will poll the API for data every 60 seconds. This polling interval is designed to work within the rate limits of myUplink APIs while providing timely updates.

Known limitations

• The integration makes the best effort to map data-points from the API to relevant entities in Home Assistant. However, some sensors may not appear for certain heat-pump models, or in other cases, numerous irrelevant entities might be created. Please create an issue on GitHub and include a diagnostic download file from your installation if you believe that the mapping can be improved.
• Entity names are available in English and cannot be automatically translated by Home Assistant. The reason is that the names are defined by the API and can be changed by updates of the API or the firmware in the appliance. However, most entity names are self-explanatory, e.g., “Room temperature (BT50)”.

Troubleshooting

Removing the integration

After removing the integration, go to the myUplink developer site and remove the credentials unless you will use them again.

从Home Assistant中移除集成实例

1. 前往 设置 > 设备与服务 并选择集成卡片。
2. 从设备列表中，选择要删除的集成实例。
3. 在条目旁边，选择三个点 菜单。然后，选择 删除。