2025.3.4
首页 ▸ Integrations ▸

LetPot

The LetPot integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] allows you to integrate your LetPot hydroponic gardens/systems into Home Assistant.

Supported devices

The following devices are supported by this integration:

  • LetPot Air (LPH-AIR)
  • LetPot Max (LPH-MAX)
  • LetPot Mini (LPH-MINI)
  • LetPot Pro (LPH-PRO)
  • LetPot Senior (LPH-SE)

Prerequisites

To use this integration, you must first create a LetPot account and connect your hydroponic garden to Wi-Fi using the official app.

配置

要将 LetPot hub 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

手动配置步骤

如果上述 My 按钮不起作用，您也可以手动执行以下步骤：

Configuration parameters

Email

The email address of your LetPot account.

Password

The password of your LetPot account.

Supported functionality

Entities

The LetPot integration provides the following entities.

Binary sensors

  • Pump: Indicates if the water pump is running (on) or idle (off). Updates may be delayed by the device until another entity updates.
    • Available for LetPot Air devices, and other device models which report this value.
    • Not available for LetPot Pro devices.

Additionally, binary sensors for possible issues are available:

  • Low nutrients: Indicates if the nutrient solution tank used for auto mode is (almost) empty and should be refilled.
    • Available for LetPot Max devices.
  • Low water: Indicates if the water tank is (almost) empty and should be refilled.
    • Available for all devices except LetPot Pro.
  • Pump error: Indicates if the water pump detected a flow issue and should be cleaned.
    • Available for some LetPot Mini and LetPot SE devices which report this value.
  • Refill error: Indicates that the external water tank/input used for refilling in auto mode is not filling up the main water tank. If you see a refill error, check the external water tank/input and the connection to the main water tank.
    • Available for LetPot Max devices.

Important

Binary sensors for issues are disabled by default. If you want to use them, you need to enable them first. See the enabling or disabling entities documentation for information on how to do this.

Sensors

For LetPot Max devices, the following sensors are available:

  • Temperature: Ambient temperature measured by the device.
  • Water level: Percentage of the water tank filled with water. The official app will display 0-30% as “Low”, 30-90% as “Medium”, and 90% or more as “High”.

Switches

  • Power: Main switch to turn on/off the device. Device features (like the built-in light and pump) will only operate when the power is on.
  • Pump cycling: Turn on/off cycling of the water pump. When on, the pump will run intermittently (controlled by the device), which can be tracked using the Pump binary sensor.

For devices with an alarm that allows muting the sound, the following switch is also available:

  • Alarm sound: Turn on/off the alarm sound.

For LetPot Max devices, the following switch is also available:

  • Auto mode: Turn on/off auto mode, which automatically adds water and nutrients to the garden when needed.

Times

  • Light on: Time when the built-in light turns on.
  • Light off: Time when the built-in light turns off.

Note

When Light on and Light off are set to the same time, the built-in light will be turned off.

Data updates

The integration receives updates when the device state changes, enabling immediate updates of the data in Home Assistant.

Remove integration

This integration follows standard integration removal, no extra steps are required.

从Home Assistant中移除集成实例

  1. 前往 设置 > 设备与服务 并选择集成卡片。
  2. 从设备列表中，选择要删除的集成实例。
  3. 在条目旁边，选择三个点 菜单。然后，选择 删除。