2025.3.4
首页 ▸ Integrations ▸

Ituran

The Ituran integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] allows you to retrieve information from your Ituran-equipped vehicle using the Ituran APP service. It pulls information from the Ituran web service regarding the vehicle’s location.

Prerequisites

You must have an Ituran account for use with the Ituran APP (Android/iOS). All devices that work with the app, should work with this integration as well.

配置

要将 Ituran hub 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

手动配置步骤

如果上述 My 按钮不起作用，您也可以手动执行以下步骤：

ID or passport number

Your government ID or passport number used to sign-up with Ituran.

Mobile phone number

The mobile phone number used to sign-up with Ituran. A one-time-password will be sent to this number.

Data updates

The information is pulled every 5 minutes from the Ituran web service; however, the data is updated at intervals determined by Ituran based on whether the vehicle is stationary or not.

Supported functionality

Device tracker

The Ituran integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] will track the location of each vehicle registered to your account.

Sensor

The Ituran integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] also exposes the following sensors for each registered vehicle:

  • Address - The address that corresponds with the vehicle’s location, as determined by Ituran
  • Battery voltage - The measured voltage (V) of the car battery. If not supported by the installation, the value will be set to -1
  • Heading - The direction (0-359°) that the vehicle is pointing to
  • Last update from vehicle - The time from when the vehicle last published its information to the Ituran cloud
  • Mileage - The distance (km) the vehicle has traveled
  • Speed - The current speed (km/h) of the vehicle

Known limitations

  • While this integration is configured with your account, you won’t be able to use the official app, as only one connection at a time is supported
    • As a workaround, it’s possible to add another user from the app, with a different ID and mobile phone number that will be dedicated for Home Assistant use.
  • The vehicle’s heading value is unreliable when it’s not in motion
  • The mileage value is not read from the vehicle’s odometer but is calculated from GPS, which may result in slight variations from the actual odometer reading

Removing the integration

This integration follows standard integration removal. No extra steps are required.

从Home Assistant中移除集成实例

  1. 前往 设置 > 设备与服务 并选择集成卡片。
  2. 从设备列表中，选择要删除的集成实例。
  3. 在条目旁边，选择三个点 菜单。然后，选择 删除。