IOmeter
The IOmeter integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] fetches data from your IOmeter
IOmeter is a German company that provides the IOmeter device for reading electricity meters.
In order for the IOmeter to be used by Home Assistant, the Core/Bridge firmware version should be at least 62/69.
配置
要将 IOmeter device 添加到您的 Home Assistant 实例中，请使用此 My 按钮：
IOmeter 可以被 Home Assistant 自动发现。如果发现了实例， 它将显示为 已发现。您可以立即进行设置。
如果没有自动发现，请不要担心！您可以设置一个 手动集成条目：
-
浏览到您的 Home Assistant 实例。
-
转到
设置 > 设备与服务。 -
在右下角，选择
Add Integration 按钮。 -
从列表中选择 IOmeter。
-
按照屏幕上的说明完成设置。
Configuration parameters
Data updates
The integration will update its sensors by polling the IOmeter Bridge every ten seconds for new values. We recommend using USB-C power for the IOmeter Core instead of batteries.
Available sensors
The following sensors are supported:
- Power (W): Active power
- Total energy usage (kWh): How much energy the meter used
- Total energy returned (kWh): How much energy the meter returned to the grid
- Meter number: Electricity meter number
- Pin status: Electricity meter pin status
- Core battery level: Battery level of the IOmeter Core in percent
- Core power status: Battery or USB-C power for the IOmeter Core
- Signal strength WiFi: WiFi connection strength of the Bridge
- Signal strength Core/Bridge: Sub-GHz connection strength between Core and Bridge
Troubleshooting
There are no commonly known issues with this integration.
Remove integration
This integration follows standard integration removal. No extra steps are required.
从Home Assistant中移除集成实例
- 前往 设置 > 设备与服务 并选择集成卡片。
- 从设备列表中，选择要删除的集成实例。
- 在条目旁边，选择三个点
菜单。然后，选择 删除。