2025.3.4
首页 ▸ Integrations ▸

Hunter Hydrawise

The hydrawise integration allows you to integrate your Hunter Hydrawise Wi-Fi irrigation controller system in Home Assistant.

There is currently support for the following device types within Home Assistant:

Prerequisites

  1. To set up the Hydrawise integration, you must first set up an online account at https://app.hydrawise.com.
  2. Then, use your online credentials to configure the integration.

配置

要将 Hunter Hydrawise integration 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

手动配置步骤

如果上述 My 按钮不起作用，您也可以手动执行以下步骤：

Binary sensor

Binary sensor entities are created for the controller:

  • Cloud API availability
  • Rain sensor moisture detection (if a rain sensor is attached to the controller)

Binary sensor entities are created for each irrigation zone:

  • Running status

Sensor

Sensor entities are created for the controller:

  • Daily total water use (if a flow sensor is attached to the controller)
  • Daily active water use (if a flow sensor is attached to the controller)
  • Daily inactive water use (if a flow sensor is attached to the controller)

Sensor entities are created for each irrigation zone:

  • Timestamp for the next scheduled automatic watering cycle
  • Remaining time (in minutes) for the current watering cycle
  • Daily active water use for the zone (if a flow sensor is attached to the irrigation zone)

Switch

Switches are added for each zone, controlling:

  • Smart watering features
  • Manual watering

Switch operation

When auto_watering is on the irrigation zone will follow the Smart Watering schedule set through the Hydrawise mobile or web app. When the auto_watering switch is off the zone’s Smart Watering schedule is suspended for 1 year.

When manual_watering is on the zone will run for 15 minutes.

Note

Due to changes in the Hydrawise API the status of the Auto Watering switches has changed. Under normal conditions the Auto Watering switches correctly reflect the Smart Watering schedule on the Hydrawise mobile or web app. However, if a rain sensor is connected to the system and it is active (rain detected), or the zone is running the Auto Watering switch will turn off. After both of those conditions are removed the switch will again show the correct Auto Watering condition.

Actions

The Hydrawise integration makes various custom actions动作在 Home Assistant 的多个地方使用。作为脚本或自动化的一部分，动作定义了触发器被激活后将发生的事情。在脚本中，动作被称为序列。 [Learn more] available.

Action hydrawise.start_watering

Starts a watering cycle in an irrigation zone.

Data attribute Optional Description
entity_id no The irrigation zone in which to start watering.
duration yes The length of time (in minutes) to run a watering cycle. If not specified (or zero), the default watering duration set in the Hydrawise mobile or web app for the irrigation zone will be used.

Action hydrawise.suspend

Suspends automatic watering in an irrigation zone until a specified date.

Data attribute Optional Description
entity_id no The irrigation zone in which to suspend watering.
until no The date & time when automatic watering should be resumed. For example, 2024-08-30 08:30

Action hydrawise.resume

Resumes automatic watering in an irrigation zone.

Data attribute Optional Description
entity_id no The irrigation zone in which to resume watering.

Valve

A valve is added for each zone allowing manual control of zone watering.

When a zone’s valve is opened through Home Assistant, it will have an automatic shutoff time set to the zone’s default watering duration configured in the Hydrawise mobile or web app.