2025.3.4
首页 ▸ Integrations ▸

Harman Kardon AVR

The harman_kardon_avr platform allows you to control Harman Kardon Network Receivers from Home Assistant.

Supported devices:

  • Harman Kardon AVR-151S
  • Other Harman Kardon AVR receivers (untested)

To add a Harman Kardon Network Receiver to your installation, add the following to your configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] file. 在更改了configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] 文件后，重启 Home Assistant 以应用更改。 该集成现在显示在集成页面的 设置 > 设备与服务 下。其实体在集成卡片上以及实体标签上列出。

# Example configuration.yaml entry
media_player:
  - platform: harman_kardon_avr
    host: IP_ADDRESS

Configuration Variables

Looking for your configuration file?
host string Required

IP address of the device, e.g., 192.168.1.32.

name string (Optional, default: Harman Kardon AVR)

Name of the device. If not set, Harman Kardon AVR is used.

port integer (Optional, default: 10025)

The port to talk to the receiver. If not set, 10025 is used.

A few notes:

  • The newest firmware automatically shuts down the AVR after a certain amount of time. The AVR is then not available on the network anymore, so the ‘on’ command will not work.
  • The AVR has no endpoints to determine the volume, muted, playing etc., so if the remote control is used, HA will not know the new states of the device.

相关主题