2025.3.4
首页 ▸ Integrations ▸

GPSD

The gpsd integration is using the GPS information collected by gpsd and a GPS receiver.

Setup

A requirement is that gpsd is installed ($ sudo apt-get install gpsd or $ sudo dnf -y install gpsd). gpsd uses the socket activation feature of systemd on recent Linux distributions for USB receivers. This means that if you plug your GPS receiver in, gpsd is started. Other GPS device may work too, but this was not tested.

$ sudo systemctl status gpsdctl@ttyUSB0.service
● gpsdctl@ttyUSB0.service - Manage ttyUSB0 for GPS daemon
   Loaded: loaded (/usr/lib/systemd/system/gpsdctl@.service; static; vendor preset: disabled)
   Active: active (exited) since Sat 2016-07-16 09:30:33 CEST; 1 day 23h ago
  Process: 5303 ExecStart=/bin/sh -c [ "$USBAUTO" = true ] && /usr/sbin/gpsdctl add /dev/%I || : (code=exited, status=0/SUCCESS)
 Main PID: 5303 (code=exited, status=0/SUCCESS)

Jul 16 09:30:33 laptop019 systemd[1]: Starting Manage ttyUSB0 for GPS daemon...
Jul 16 09:30:33 laptop019 gpsdctl[5305]: gpsd_control(action=add, arg=/dev/ttyUSB0)
Jul 16 09:30:33 laptop019 gpsdctl[5305]: reached a running gpsd

To check if your setup is working, connect to port 2947 on the host where gpsd is running with telnet. This may need adjustments to your firewall.

$ telnet localhost 2947
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
{"class":"VERSION","release":"3.15","rev":"3.15-2.fc23","proto_major":3,"proto_minor":11}

配置

要将 GPSD integration 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

手动配置步骤

如果上述 My 按钮不起作用，您也可以手动执行以下步骤：