2025.3.4
首页 ▸ Integrations ▸

Epson

The Epson integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] allows you to control a Epson projector from Home Assistant. The device has to be turned on during initial configuration. When you want to add a device for the first time, turn it on before following the integration steps.

配置

要将 Epson integration 添加到您的 Home Assistant 实例中，请使用此 My 按钮：

手动配置步骤

如果上述 My 按钮不起作用，您也可以手动执行以下步骤：

Supported features

  • turn on/off
  • set input
  • set/get color mode including high/low lamp
  • increase/decrease volume
  • mute/unmute audio
  • send next/previous track

Supported devices

  • Epson projectors supporting ESC/VP21 protocol.

Tested devices

  • Epson EH-TW5350
  • Epson EH-TW7000
  • Epson EH-TW9400W (shares platform with 7400/8400/9400(w))
  • Epson EH-TW3200
  • Epson Powerlite W39

Configuration

This integration supports connecting to an Epson projector via LAN or Serial.

LAN connection

Connect the projector to your LAN and enter the IP address of the projector when prompted, selecting either HTTP or TCP depending on what the projector model supports. The iProjection app by Epson can be used to test if it is working.

Serial connection

Connect projector directly to Home Assistant via a serial cable, or ser2net can be used as a Serial to network proxy.

ser2net configuration

A ser2net configuration similar to below can be used to expose the projector connected to /dev/ttyUSB0 on port 3629.

connection: &con1
  accepter: tcp,3629
  connector: serialdev,/dev/ttyUSB0,9600n81

Then the projector can be added to the integration using socket://<ser2net_ip>:3629.