2025.3.4
首页 ▸ Integrations ▸

Bbox

The bbox integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] uses the Bbox Modem Router from the French Internet provider Bouygues Telecom. Sensors are mainly bandwidth measures.

There is currently support for the following device types within Home Assistant:

Note

Due to third party limitation, the sensors will only be available if Home Assistant and the Bbox are on the same local area network. You can check this by going to 192.168.1.254 with your web browser.

Presence detection

The bbox integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] offers presence detection by looking at connected devices to a Bbox based router from Bouygues, which is one of the main Internet provider in France.

Bbox is a generic name for different hardware routers. The integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] has been tested with the following devices:

  • Sagem F@st 5330b

Configuration

To use an Bbox router in your installation, add the following to your configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] file. 在更改了configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] 文件后，重启 Home Assistant 以应用更改。 该集成现在显示在集成页面的 设置 > 设备与服务 下。其实体在集成卡片上以及实体标签上列出。

# Example configuration.yaml entry
device_tracker:
  - platform: bbox

Configuration Variables

Looking for your configuration file?
host string (Optional, default: 192.168.1.254)

IP address of your Bbox device.

Important

For now and due to third party limitation, the Bbox must be on the same local network as the Home Assistant installation.

See the device tracker integration page for instructions how to configure the people to be tracked.

Sensor

To add Bbox sensors to your installation, add the following to your configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] file. 在更改了configuration.yamlconfiguration.yaml 文件是 Home Assistant 的主要配置文件。它列出了要加载的集成及其特定配置。在某些情况下，需要直接在 configuration.yaml 文件中手动编辑配置。大多数集成可以在 UI 中配置。 [Learn more] 文件后，重启 Home Assistant 以应用更改。 该集成现在显示在集成页面的 设置 > 设备与服务 下。其实体在集成卡片上以及实体标签上列出。

# Example configuration.yaml entry
sensor:
  - platform: bbox
    monitored_variables:
      - down_max_bandwidth
      - up_max_bandwidth
      - current_down_bandwidth
      - current_up_bandwidth
      - uptime
      - number_of_reboots

Configuration Variables

Looking for your configuration file?
name string (Optional, default: Bbox)

Name to display in the frontend.

monitored_variables list Required

Sensors to display in the frontend.

down_max_bandwidth

Maximum bandwidth available for download.

up_max_bandwidth

Maximum bandwidth available for upload.

current_down_bandwidth

Instant measure of the current used bandwidth for download.

current_up_bandwidth

Instant measure of the current used bandwidth for upload.

uptime

Uptime since the last boot.

number_of_reboots

Number of reboot since the initial configuration of the router.

相关主题