APsystems
The APsystems integration集成将 Home Assistant 与您的设备、服务等连接和集成。 [Learn more] allows you to read the data from your APsystems EZ1
Sensors
Numerical sensors
| Sensor ID | Unit | Description |
|---|---|---|
| total_power | W | Total current output of the inverter |
| lifetime_production_p1 | kWh | Lifetime production of first input |
| lifetime_production_p2 | kWh | Lifetime production of second input |
| lifetime_production | kWh | Lifetime production of both inputs combined |
| total_power_p1 | W | Current input on first input |
| total_power_p2 | W | Current input on second input |
| today_production | kWh | Today’s production of both inputs combined |
| today_production_p1 | kWh | Today’s production of first input |
| today_production_p2 | kWh | Today’s production of second input |
Binary sensors
| Sensor ID | Description |
|---|---|
| off_grid_status | On when the inverter is not connected to the power grid |
| dc_1_short_circuit_error_status | Short circuit detected on first input |
| dc_2_short_circuit_error_status | Short circuit detected on second input |
| output_fault_status | Output because of any error deactivated |
Settings
| Setting ID | Type | Description |
|---|---|---|
| inverter_status | switch | Enables or disables the inverter’s output |
| output_limit | number | Sets the max output of the inverter |
Prerequisites
Make sure the local API is activated and set to Continuously. For that, connect to the inverter via Bluetooth using the app and go to Settings > Local Mode, set the switch Enable Local Mode to on and make sure to set this to Continuously.
配置
要将 APsystems device 添加到您的 Home Assistant 实例中，请使用此 My 按钮：
如果上述 My 按钮不起作用，您也可以手动执行以下步骤：
-
浏览到您的 Home Assistant 实例。
-
转到
设置 > 设备与服务。 -
在右下角，选择
Add Integration 按钮。 -
从列表中选择 APsystems。
-
按照屏幕上的说明完成设置。